Eskil

    incr doingLine2
}

# Detect if only newlines has changed within the block, e.g.
# when rearranging newlines.
# Rearranging newlines in comment blocks usually leads to
# words moving across "*", ignore * too.
# Returns 0 if the block in not handled here, non-zero if the block is done,
# negative if the block is considered not a change.
proc ParseBlocksAcrossNewline {top block1 block2} {
    global doingLine1 doingLine2

    set map {{ } {} \t {}}
    set RE {\n\s*\*?|\s}
    set equal 0
    set visible [expr {$::eskil(ignorenewline) == 1}]

        return [expr {($n1 > $n2 ? $n1 : $n2) + 1}]
    } else {
        return [expr {-($n1 > $n2 ? $n1 : $n2)}]
    }
}

# Insert two blocks of lines in the compare windows.

proc insertMatchingBlocks {top block1 block2 line1 line2 details} {
    global doingLine1 doingLine2

    # A large block may take time.  Give a small warning.
    set n1 [llength $block1]
    set n2 [llength $block2]
    if {$n1 * $n2 > 1000} {
        set ::widgets($top,eqLabel) "!"
        #puts "Eskil warning: Analyzing a large block. ($size1 $size2)"
        update idletasks
    }

    
    # Detect if only newlines has changed within the block, e.g.
    # when rearranging newlines.
    if {$::eskil(ignorenewline)} {
        set res [ParseBlocksAcrossNewline $top $block1 $block2]
        if {$res != 0} {
            # FIXA: move this to ParseBlocksAcrossNewline ?
            if {$res > 0 && $details} {
                addChange $top $res change $line1 $n1 $line2 $n2
                nextHighlight $top
            } else {
                addMapLines $top [expr {abs($res)}]
            }

            return
        }
    }

    set apa [compareBlocks $block1 $block2]
    # Fine grained changes means that each line is considered its own
    # chunk. This is used for merging better to avoid the same decision
    # for an entire block.
    set finegrain [expr {$::Pref(finegrainchunks) && $details}]

    set t1 0
    set t2 0
    foreach c $apa {
        if {$c eq "c"} {
            set textline1 [lindex $block1 $t1]
            set textline2 [lindex $block2 $t2]
            insertMatchingLines $top $textline1 $textline2
            if {$finegrain} {
                addChange $top 1 change [expr {$line1 + $t1}] 1 \
                        [expr {$line2 + $t2}] 1
                nextHighlight $top
            }
            incr t1
            incr t2
        } elseif {$c eq "C"} {
	    # This is two lines that the block matching considered
	    # too different to use line parsing on them.
	    # Marked the whole line as deleted/inserted
            set textline1 [lindex $block1 $t1]
            set textline2 [lindex $block2 $t2]
            $::widgets($top,wLine1) insert end [myFormL $doingLine1] \
                    "hl$::HighLightCount change"
            $::widgets($top,wDiff1) insert end "$textline1\n" new1
            $::widgets($top,wLine2) insert end [myFormL $doingLine2] \
                    "hl$::HighLightCount change"
            $::widgets($top,wDiff2) insert end "$textline2\n" new2
            if {$finegrain} {
                addChange $top 1 change [expr {$line1 + $t1}] 1 \
                        [expr {$line2 + $t2}] 1
                nextHighlight $top
            }
            incr doingLine1
            incr doingLine2
            incr t1
            incr t2
        } elseif {$c eq "d"} {
            set bepa [lindex $block1 $t1]
            $::widgets($top,wLine1) insert end [myFormL $doingLine1] \
                    "hl$::HighLightCount change"
            $::widgets($top,wDiff1) insert end "$bepa\n" new1
            emptyLine $top 2
            incr doingLine1
            if {$finegrain} {
                addChange $top 1 new1 [expr {$line1 + $t1}] 1 \
                        [expr {$line2 + $t2}] 0
                nextHighlight $top
            }
            incr t1
        } elseif {$c eq "a"} {
            set bepa [lindex $block2 $t2]
            $::widgets($top,wLine2) insert end [myFormL $doingLine2] \
                    "hl$::HighLightCount change"
            $::widgets($top,wDiff2) insert end "$bepa\n" new2
            emptyLine $top 1
            incr doingLine2
            if {$finegrain} {
                addChange $top 1 new2 [expr {$line1 + $t1}] 0 \
                        [expr {$line2 + $t2}] 1
                nextHighlight $top
            }
            incr t2
        }
    }
    if {!$finegrain} {
        if {$details} {
            addChange $top [llength $apa] change $line1 $n1 $line2 $n2
            nextHighlight $top
        } else {
            addMapLines $top [llength $apa]
        }

    }
}

# Process one of the change/add/delete blocks reported by diff.
#  ch1 is a file channel for the left file
#  ch2 is a file channel for the right file
#  n1/n2 is the number of lines involved
#  line1/line2 says on what lines this block starts
# If n1/n2 are both 0, it means that this is the last lines to be displayed.
#  In that case line1/line2, if non-zero says the last line to display.

proc doText {top ch1 ch2 n1 n2 line1 line2} {
    global doingLine1 doingLine2 Pref

    if {$n1 == 0 && $n2 == 0} {
        # All blocks have been processed. Continue until end of file.
        # If "show all" is not on, just display a couple of context lines.
        set limit -1

        while {[gets $ch1 apa] != -1} {
            if {$line1 > 0 && $doingLine1 > $line1} break
            insertLine $top 1 $doingLine1 $apa
            incr doingLine1
            incr t
            if {$limit >= 0 && $t >= $limit} break
        }
        return
    }

    # Is this a change block, a delete block or a insert block?
    if {$n1 == 0} {set tag2 new2} else {set tag2 change}
    if {$n2 == 0} {set tag1 new1} else {set tag1 change}

    # Display all equal lines before next diff

            }
        }
        incr doingLine1
        incr doingLine2
        incr t
        if {$::diff($top,limitlines) && \
                ($::diff($top,mapMax) > $::diff($top,limitlines))} {
            return
        }
    }
    # This should not happen unless something is wrong...
    if {$doingLine2 != $line2} {
        disallowEdit $top
        $::widgets($top,wDiff1) insert end \
                "**Bad alignment here!! $doingLine2 $line2**\n"

            gets $ch2 textline2
            insertMatchingLines $top $textline1 $textline2
        }
        if {$::diff(filter) != "" &&  $::diff(filterflag)} {
            addMapLines $top $n1
        } else {
            addChange $top $n1 change $line1 $n1 $line2 $n2
            nextHighlight $top
        }
    } else {
        if {$n1 != 0 && $n2 != 0 && $Pref(parse) >= 2 && \
                ($n1 * $n2 < 1000 || $Pref(parse) == 3)} {
            # Full block parsing
            set block1 {}
            for {set t 0} {$t < $n1} {incr t} {
                gets $ch1 apa
                lappend block1 $apa
            }
            set block2 {}
            for {set t 0} {$t < $n2} {incr t} {
                gets $ch2 apa
                lappend block2 $apa
            }
            insertMatchingBlocks $top $block1 $block2 $line1 $line2 1




        } else {
            # No extra parsing at all.
            for {set t 0} {$t < $n1} {incr t} {
                gets $ch1 apa
                insertLine $top 1 $doingLine1 $apa $tag1
                incr doingLine1
            }
            for {set t 0} {$t < $n2} {incr t} {
                gets $ch2 apa
                insertLine $top 2 $doingLine2 $apa $tag2
                incr doingLine2
            }
            if {$n1 <= $n2} {
                for {set t $n1} {$t < $n2} {incr t} {
                    emptyLine $top 1
                }
                addChange $top $n2 $tag2 $line1 $n1 $line2 $n2
                nextHighlight $top
            } elseif {$n2 < $n1} {
                for {set t $n2} {$t < $n1} {incr t} {
                    emptyLine $top 2
                }
                addChange $top $n1 $tag1 $line1 $n1 $line2 $n2
                nextHighlight $top
            }
        }
    }
    # Empty return value
    return
}

proc enableRedo {top} {
    $top.m.mf entryconfigure "Redo Diff" -state normal
    $top.m.mt entryconfigure "Merge"     -state normal
}

            incr doingLine2
        }
    }

    set t 0
    foreach i $diffres {
        lassign $i line1 n1 line2 n2
        doText $top $ch1 $ch2 $n1 $n2 $line1 $line2
        if {$::diff($top,limitlines) && \
                ($::diff($top,mapMax) > $::diff($top,limitlines))} {
            break
        }





        # Get one update when the screen has been filled.
        # Show the first diff.
        if {$firstview && $::diff($top,mapMax) > 100} {
            set firstview 0
            showDiff $top 0
            update idletasks

    if {!$tmp1 && $tmp2} {.lpm delete last}

    set ::diff($top,nopopup) 1
    tk_popup .lpm $X $Y
    after idle [list after 1 [list set ::diff($top,nopopup) 0]]
}

proc nextHighlight {top} {
    set tag hl$::HighLightCount
    foreach n {1 2} {
        $::widgets($top,wLine$n) tag bind $tag <ButtonPress-3> \
                "hlPopup $top $n $::HighLightCount %X %Y %x %y ; break"
        $::widgets($top,wLine$n) tag bind $tag <ButtonPress-1> \
                "hlSelect $top $::HighLightCount"
    }
    incr ::HighLightCount
}

#########
# Zooming
#########

proc zoomRow {w X Y x y} {

            -value 2
    $top.m.mo.p add radiobutton -label "Blocks" -variable Pref(parse) -value 3
    $top.m.mo.p add separator
    $top.m.mo.p add radiobutton -label "Characters" \
            -variable Pref(lineparsewords) -value "0"
    $top.m.mo.p add radiobutton -label "Words" \
            -variable Pref(lineparsewords) -value "1"
    $top.m.mo.p add separator
    $top.m.mo.p add checkbutton -label "Fine chunks" -variable Pref(finegrainchunks)
    $top.m.mo.p add separator
    $top.m.mo.p add checkbutton -label "Mark last" -variable Pref(marklast)

    menu $top.m.mo.c
    $top.m.mo.c add radiobutton -label "Show all lines" \
            -variable ::Pref(context) -value -1
    $top.m.mo.c add radiobutton -label "Show only diffs" \

  -prefix <str> : Care mainly about words starting with "str".
  -preprocess <pair> : TBW

  -r <ver>    : Version info for version control mode.
  -cvs        : Detect CVS first, if multiple version systems are used.
  -svn        : Detect SVN first, if multiple version systems are used.

  -a <file>   : Give anscestor file for three way merge.
  -conflict   : Treat file as a merge conflict file and enter merge
                mode.
  -o <file>   : Specify merge result output file.
  -fine       : Use fine grained chunks. Useful for merging.

  -browse     : Automatically bring up file dialog after starting.
  -server     : Set up Eskil to be controllable from the outside.

  -print <file>          : Generate PDF and exit.
  -printCharsPerLine <n> : Adapt font size for this line length and wrap. (80)
  -printPaper <paper>    : Select paper size (a4)

    set allOpts {
        -w --help -help -b -noignore -i -nocase -nodigit -nokeyword -prefix
        -noparse -line -smallblock -block -char -word -limit -nodiff -dir
        -clip -patch -browse -conflict -print
        -printHeaderSize -printCharsPerLine -printPaper
        -printColorChange -printColorOld -printColorNew
        -server -o -a -fine -r -context -cvs -svn -review
        -foreach -preprocess -close -nonewline -plugin -plugininfo
        -plugindump -pluginlist
    }

    # If the first option is "--query", use it to ask about options.
    if {$::eskil(argc) == 2 && [lindex $::eskil(argv) 0] == "--query"} {
        set arg [lindex $::eskil(argv) 1]

                package require Tk
                tk appname Eskil
            }
        } elseif {$arg eq "-o"} {
            set nextArg mergeFile
        } elseif {$arg eq "-a"} {
            set nextArg ancestorFile
        } elseif {$arg eq "-fine"} {
            set Pref(finegrainchunks) 1
        } elseif {$arg eq "-r"} {
            set nextArg revision
        } elseif {$arg eq "-debug"} {
            set ::eskil(debug) 1
        } elseif {$arg eq "-svn"} {
            set preferedRev "SVN"
        } elseif {$arg eq "-cvs"} {

    set Pref(colornew1) darkgreen
    set Pref(colornew2) blue
    set Pref(bgequal) ""
    set Pref(bgchange) \#ffe0e0
    set Pref(bgnew1) \#a0ffa0
    set Pref(bgnew2) \#e0e0ff
    set Pref(context) -1
    set Pref(finegrainchunks) 0
    set Pref(marklast) 1
    set Pref(linewidth) 80
    set Pref(lines) 60
    set Pref(editor) ""
    set Pref(regsub) {}
    set Pref(toolbar) 0
    set Pref(wideMap) 0 ;# Not settable in GUI yet